MDD412 is a flat, longitudinal profile with repeated subtle cuts along the entire length. It can be used either vertically to separate between two spaces or even horizontally to create a chair rail.
See below for product features.
Waterproof
Mardom Decor mouldings are fully waterproof. This means that they can be successfully used in rooms with high humidity, such as bathrooms or kitchens.
Resistant to UV rays
Thanks to special refinements and coatings, mouldings are resistant to UV radiation. Installation of mouldings in a sunny place will not cause yellowing or discolouration.
Primed and Paintable
The mouldings are factory-coated with a special primer with smoothing, protecting properties that facilitate the distribution of subsequent layers of paint. For a perfect visual effect, we recommend painting the mouldings with any water paint after installation.
Swelling resistance and durability
Mardom Decor mouldings, unlike MDF products, do not undergo deformation, delamination and swelling under the influence of moisture. These mouldings are also impact resistance, which adds to their durability.
Light and very resistant material
The product is made of lightweight ProFoam material. This material allows for the assembly of large-sized elements without the risk of their detachment from the wall or ceiling.
Installation
Surface preparation is key! First, make sure that the surface is dry and dust-free. Use a mitre saw or hand saw to cut the mouldings. With a sealant gun, apply glue on the length of the moulding. At Noble, we offer installation of mouldings, but if you wish to do installation yourself, you can rent the mitre box at our store.
Recommended adhesive
Use the Mardom Decor Fix Pro adhesive for a long-lasting seal between the mouldings and the surface. One tube is enough for installation of about 8 metres of mouldings. Use the Flex Filler to fill the joints between mouldings. This filler is resistant to moisture, easy to apply and sand and prevents cracks from forming.
MD007 Wall Moulding 
