CornicesCurtain ProfilesLighting Profiles

MD105 Cornice/Lighting/Curtain Profile


Mardom Decor MD105 curtain profile is perfect for covering unsightly curtain rods and curtain tracks. The MD105 is a multi-functional profile and can be used as a curtain profile, cornice, and even lighting profile, thanks to its LightGuard Technology. For these product variants, please refer to MD105 Cornice and MD105 Lighting Moulding. See below for detailed product features.      

Waterproof
Mardom Decor mouldings are fully waterproof. This means that they can be successfully used in rooms with high humidity, such as bathrooms or kitchens.

 

 

Resistant to UV rays
Thanks to special refinements and coatings, our curtain profiles are resistant to UV radiation. Installation of the curtain profile in a sunny place will not cause yellowing or discolouration.

 

 

Primed and Paintable
The mouldings are factory-coated with a special primer with smoothing, protecting properties that facilitate the distribution of subsequent layers of paint. For a perfect visual effect, we recommend painting the mouldings with any water paint after installation.

 

 

Swelling resistance and durability
Mardom Decor mouldings, unlike MDF products, do not undergo deformation, delamination and swelling under the influence of moisture.  These mouldings are also impact resistance, which adds to their durability.

 

 

Save time and reduce renovation costs
A curtain rail is the most effective way to disguise a curtain rod. It is a cost-saving alternative to ceiling/curtain recesses. The curtain profile can be continued around the perimeter of the room as a cornice.

 

 

LightGuard Technology
The moulding has a unique LightGuard® technology, allowing light to diffuse beautifully around the profile instead of through the panel. The moulding has profiled spaces for installation of LED strips, which allows the light to fall at an angle that gives the best backlight effect.

 

 

For use with LED Lighting
The specially profiled inner side of the strip has a space for sticking the LED strip. Thanks to this, you can get the effect of delicate room lighting.

 

 

Durable material
The product is made of PolyForce material using the innovative ScratchShield technology, which features increased impact strength and impact resistance.

 

 

Installation
Surface preparation is key! First, make sure that the surface is dry and dust-free. Use a mitre saw or hand saw to cut the mouldings. With a sealant gun, apply glue on the length of the moulding. At Noble, we offer installation of mouldings, but if you wish to do installation yourself, you can rent the mitre box at our store.

 

 

Recommended adhesive

Use the Mardom Decor MAX adhesive, which features extreme bonding strength indoors and outdoors. One tube is enough for installation of about 8 metres of mouldings.